4K/18G POH/HDBT/HDMI Extender Balun Kit

4K/18G POH/HDBT/HDMI Extenders (Includes KIT TX/RX 4K/40Meters 1080P/70Meters)

HDBaseT via Single CAT5e/6 UTP/STP Extension: With fully automatic adjustment of feedback, equalization, and amplification depending on cabling length

·  4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)

·  Flexible Power over HDBaseT: Only one power connection needed. Tx may power Rx, or Rx may power Tx.

·  Low Profile: Super slim chassis design

·  Signal Extension: For resolution and cable quality

»» 4K/UHD: 125 ft. (40m) maximum »» 1080p: 230 ft. (70m) maximum

·  HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels

·  HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant

·  Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit

·  EDID Control: Internal library with 15 EDID handshakes including 4K with HDR in addition to native EDID data from Output/Display device connected to Rx

·  Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source & display, EDID Control handshake, and Hot Plug Detection control

·  IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block

·  Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units

·  RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector

·  Unit Control Mode: Provides control of Tx unit as well as connectivity status

·  Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™

·  CEC Pass-thru: For inter-device control between input and output HDMI channel

·  Control System Support: Fully controllable by all RS-232 supported control systems via open API: Compass Control® Pro, AMX®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc.